Saul Swag - Double
All of our Saul Swags are genuine Australian-made camping swags made from Australian-made canvas.
Our Canvas is a blend of Cotton and Polyester, this gives it a high strength and is breathable, it is manufactured by the last manufacture in Australia from Australian grown Cotton. (Wax Converters Textile Pty Ltd. Rutherford NSW)
Our generous design means you have the width to be comfortable with plenty of leg room so you don’t have any pressure on your feet or toes. (12.28 m2 of canvas)
Our simple yet effective design eliminates the need for frustrating laces; zippers that catch in your bedding; or Velcro tabs and press studs that easily clog with grass, sand or dirt, and then stop working.
Being a true traditional style Swag this allows you to open/close it up as much as is required due to the weather conditions (hot/cold and wet/dry)
All of our fittings are solid brass and marine-grade stainless steel. Zippers can’t handle being rolled tightly, leak when it’s wet, and will eventually break, and we don’t use plastic fittings because they break when stood on or driven over - our swags need to be tough!
The head cover has 6 solid brass eyelets (3 each side) which allows it to be strung up to a sapling to keep you dry, create shade from early morning sun or act as a windbreak. You can still smell the fresh air and hear and see what goes on outside unlike being in a dome or tent swag.
Our double swags are not sold with a mattress. We recommend you source your own mattress, air bed or suitable density foam.
Approximate Measurements (unrolled flat):
Standard - Body width 1.45m x length 2.10m; head cover width 1.8 x length 1.3m
Extra Long* - Body width 1.45m x length 2.35m; head cover width 1.8 x length 1.3m
*Extra length swags are recommended for people over 193cm (6’4”) tall.
Weight: Without mattress - 7kg
*Please note
Our double Swags are made when ordered (due to the large amount of canvas in each) Please allow 7 days for us to make. Please contact us if you require earlier or have any concerns.
Mattresses are not available to purchase with our double swags.
A double swag rolls up to be approximately 75cm long by 18cm in diameter without a mattress, or approximately 145cm long by 30cm in diameter with a mattress (rolled differently). As all of our products are made by hand, there may be a very slight variation in measurements.
Carrying straps included (Australian Made HPW webbing with a PVC coating)
All of our Saul Swags are genuine Australian-made camping swags made from Australian-made canvas.
Our Canvas is a blend of Cotton and Polyester, this gives it a high strength and is breathable, it is manufactured by the last manufacture in Australia from Australian grown Cotton. (Wax Converters Textile Pty Ltd. Rutherford NSW)
Our generous design means you have the width to be comfortable with plenty of leg room so you don’t have any pressure on your feet or toes. (12.28 m2 of canvas)
Our simple yet effective design eliminates the need for frustrating laces; zippers that catch in your bedding; or Velcro tabs and press studs that easily clog with grass, sand or dirt, and then stop working.
Being a true traditional style Swag this allows you to open/close it up as much as is required due to the weather conditions (hot/cold and wet/dry)
All of our fittings are solid brass and marine-grade stainless steel. Zippers can’t handle being rolled tightly, leak when it’s wet, and will eventually break, and we don’t use plastic fittings because they break when stood on or driven over - our swags need to be tough!
The head cover has 6 solid brass eyelets (3 each side) which allows it to be strung up to a sapling to keep you dry, create shade from early morning sun or act as a windbreak. You can still smell the fresh air and hear and see what goes on outside unlike being in a dome or tent swag.
Our double swags are not sold with a mattress. We recommend you source your own mattress, air bed or suitable density foam.
Approximate Measurements (unrolled flat):
Standard - Body width 1.45m x length 2.10m; head cover width 1.8 x length 1.3m
Extra Long* - Body width 1.45m x length 2.35m; head cover width 1.8 x length 1.3m
*Extra length swags are recommended for people over 193cm (6’4”) tall.
Weight: Without mattress - 7kg
*Please note
Our double Swags are made when ordered (due to the large amount of canvas in each) Please allow 7 days for us to make. Please contact us if you require earlier or have any concerns.
Mattresses are not available to purchase with our double swags.
A double swag rolls up to be approximately 75cm long by 18cm in diameter without a mattress, or approximately 145cm long by 30cm in diameter with a mattress (rolled differently). As all of our products are made by hand, there may be a very slight variation in measurements.
Carrying straps included (Australian Made HPW webbing with a PVC coating)
All of our Saul Swags are genuine Australian-made camping swags made from Australian-made canvas.
Our Canvas is a blend of Cotton and Polyester, this gives it a high strength and is breathable, it is manufactured by the last manufacture in Australia from Australian grown Cotton. (Wax Converters Textile Pty Ltd. Rutherford NSW)
Our generous design means you have the width to be comfortable with plenty of leg room so you don’t have any pressure on your feet or toes. (12.28 m2 of canvas)
Our simple yet effective design eliminates the need for frustrating laces; zippers that catch in your bedding; or Velcro tabs and press studs that easily clog with grass, sand or dirt, and then stop working.
Being a true traditional style Swag this allows you to open/close it up as much as is required due to the weather conditions (hot/cold and wet/dry)
All of our fittings are solid brass and marine-grade stainless steel. Zippers can’t handle being rolled tightly, leak when it’s wet, and will eventually break, and we don’t use plastic fittings because they break when stood on or driven over - our swags need to be tough!
The head cover has 6 solid brass eyelets (3 each side) which allows it to be strung up to a sapling to keep you dry, create shade from early morning sun or act as a windbreak. You can still smell the fresh air and hear and see what goes on outside unlike being in a dome or tent swag.
Our double swags are not sold with a mattress. We recommend you source your own mattress, air bed or suitable density foam.
Approximate Measurements (unrolled flat):
Standard - Body width 1.45m x length 2.10m; head cover width 1.8 x length 1.3m
Extra Long* - Body width 1.45m x length 2.35m; head cover width 1.8 x length 1.3m
*Extra length swags are recommended for people over 193cm (6’4”) tall.
Weight: Without mattress - 7kg
*Please note
Our double Swags are made when ordered (due to the large amount of canvas in each) Please allow 7 days for us to make. Please contact us if you require earlier or have any concerns.
Mattresses are not available to purchase with our double swags.
A double swag rolls up to be approximately 75cm long by 18cm in diameter without a mattress, or approximately 145cm long by 30cm in diameter with a mattress (rolled differently). As all of our products are made by hand, there may be a very slight variation in measurements.
Carrying straps included (Australian Made HPW webbing with a PVC coating)
Canvas Care Instructions
Clean only with cold water and a soft brush - don’t use soap or detergent
Ensure swag is completely dry prior to storing
Do not expose to petrol, oil or solvents
Restore well-worn products with DYNAPROOF
If you would prefer to place an order and pay via direct bank transfer, please fill out our order form here.